|
|
|
|
The
original and still the best value for
your solid surface manufacturing dollar!
Although minor
changes and improvements have been made over
the years, this is still the same original
design that has helped numerous
manufacturers enter the profitable solid
surface industry. The design has been so
successful, in fact, that these mixers are
used by many of the raw material suppliers
for testing and development purposes, as
well as, demonstrations of their own
products to customers. The unique mixing
action is made possible by a specially
designed mixing blade and mixing pot
configuration that takes advantage of
centrifugal force generated by the rotating
pot. The mixing blade with nylon scrappers
wipes matrix from the sides and bottom of
the pot. Then, through a lifting and rolling
action deposits the matrix so that it
forcefully flows through the pots center.
This action assures complete blending of all
materials in the pot and allows even very
small batches, often less than 10 lbs, to be
processed. Not only are dead spots
eliminated, but wetting out of materials
is accomplished quickly and thoroughly.
|
lowest priced, easiest to
maintain vacuum mixer in the
industry |
|
independent on/off control
switches for mixing and vacuum
operation |
|
mixing arm tilts and locks in
place for cleaning blade
directly over pot
|
|
U.L.
and C.S.A. listed, explosion
proof rated controls and motors |
|
parts list, maint. Guide, and
operating instr. furnished with
each mixer |
|
Series II model V150
Series II model V250 |
Series II model V350
Series II model V500 |
|
|
 |
The smallest version of
the popular Series II
vacuum mixers. With a
mixing capacity of 10
-150 lbs the V150 is an
excellent choice for
producing smaller
batches for sinks and
specialty goods. Also
used for product
testing, demonstration,
and training.
Separate controls for
mixing and vacuum motors
allow operator to
extract air from mixing
pot prior to blending
for less chance of air
entrapment in finished
products. |
|
Vacuum mixer construction: |
all
welded metal base frame and
covers for durability, enamel
painted MarMax
green.
|
|
Mixing pot: |
22
dia. x 16 deep, roll formed,
tig welded 10 gage, 304B grade
stainless steel with companion
style drive for use with Pot
Tamer transfer pouring dolly. |
|
Mixing blade: |
formed and tig welded 3/8 x 2
stainless steel flat bar with
replaceable nylon scrappers and
quick release attachment pin. |
|
Capacity: |
150
lbs., 37.5 qts, 9.4 gal, 36
liters |
|
Electrical: |
|
Factory wired, operation
tested motors and
controls |
|
UL and CSA listed
explosion proof rated
for use in hazardous
areas, 3/4 hp direct
drive vacuum pump motor,
1 hp gear reducer drive
motor. |
110/220volt-60hz-single
phase,
230/460volt-60hz-three
phase
110/220volt-50hz-single
phase,
220/380/440volt-50hz-three
phase |
|
|
Controls: |
independent switches for drive
and vacuum motors, aluminum
body, UL listed explosion proof
rated for use in hazardous
areas.
|
|
Drive: |
constant torque rated for longer
component life @ 891 in. lb., 58
rpm |
|
Vacuum: |
rotatary vane vacuum pump, oil
less design, permanently
lubricated and sealed bearings,
self adjusting/self lubricating
graphite vanes for maximum
efficiency and long life with
minimal maintenance. 25-27 Hg. |
|
Vacuum pot lid: |
machined 6061 3/4" thick
aluminum plate with replaceable
1/2 thick gum rubber seal and
10 gage stainless steel seal
retaining plate. Gas shock
assisted lift. |
|
Base size and shipping weight:
|
24
wide, 37 length, 400 lbs. |
|
All
vacuum mixers are fully
assembled and factory tested
prior to shipping and shipped
enclosed in wood crating |
|
|
 |
The mid range capacity
model of the Series II
vacuum mixers. The 18
300 lb. mixing capacity
offers manufacturers the
flexibility to produce a
wide range of solid
surface products. The
V250 is able to mix
enough material for
multiple parts in a
single batch for jobs
where an exact color
match may be in
question.
Gas lift shocks assist
an operator raising the
vacuum pot lid and
position the mixing
blade above the pot for
convenient cleaning. A
quick release pin
secures the mixing blade
during operation and
allows for easy removal. |
|
Vacuum mixer construction: |
all
welded metal base frame and
covers for durability, enamel
painted MarMax
green. |
|
Mixing pot: |
25
dia. x 21 deep, roll formed,
tig welded 10 gage, 304B grade
stainless steel with companion
style drive for use with Pot
Tamer transfer pouring dolly. |
|
Mixing blade: |
formed and tig welded 3/8 x 2
stainless steel flat bar with
replaceable nylon scrappers and
quick release pin. |
|
Capacity: |
300
lbs., 75 qts, 18.8 gal, 72
liters |
|
Electrical: |
|
UL and CSA listed
explosion proof rated
for use in hazardous
areas, 1 hp direct drive
vacuum pump motor, 1 1/2
hp gear reducer drive
motor. |
110/220volt-60hz-single
phase,
230/460volt-60hz-three
phase
110/220volt-50hz-single
phase,
220/380/440volt-50hz-three
phase |
|
|
Controls: |
independent switches for drive
and vacuum motors, aluminum
body, UL listed explosion proof
rated for use in hazardous
areas. |
|
Drive: |
constant torque vacuum pump, oil
less design, permanently
lubricated and sealed bearings,
self adjusting/self lubricating
graphite vanes for maximum
efficiency and long life with
minimal maintenance. 25 -27
Hg. |
|
Vacuum pot lid: |
machined 6061 3/4" thick
aluminum plate wih replaceable
½ thick gum rubber seal and 10
gage stainless steel retaining
plate. |
|
Base size and shipping weight:
|
24
wide, 37 length, 480 lbs.
|
|
All
vacuum mixers are fully
assembled and factory tested
prior to shipping and shipped
enclosed in wood crating |
|
|
 |
The workhorse of the
Series II vacuum mixers.
With a capacity up to
400 lbs the V350 can
often produce entire
jobs in a single batch.
The unique design of the
Series II models also
allow the V350 to mix
batches as small as 20
lbs. Very versatile for
producing small
specialty products up to
large solid surface
sheet goods.
Oil less vacuum pumps
with self adjusting/self
lubricating graphite
vanes assure peak
performance. Permanently
lubricated and sealed
motor bearings provide
long life with a minimal
amount of maintenance. |
|
Vacuum
mixer construction: |
all
welded metal base frame and
covers for durability, enamel
painted MarMax
green. |
|
Mixing pot: |
28
dia. x 21 deep, roll formed,
tig welded 10 gage, 304B grade
stainless steel with companion
style drive for use with Pot
Tamer transfer pouring dolly. |
|
Mixing blade: |
formed and tig welded 3/8 x 2
stainless steel flat bar with
replaceable nylon scrappers and
quick release attachment pin. |
|
Capacity: |
400
lbs., 100 qts., 25 gallons, 96
liters |
|
Electrical: |
|
UL and CSA listed
explosion proof rated
for use in hazardous
areas, 1 hp direct drive
vacuum pump motor, 2 hp
gear reducer drive
motor. |
110/220volt-60hz-single
phase,
230/460volt-60hz-three
phase
110/220volt-50hz-single
phase,
220/380/440volt-50hz-three
phase |
|
|
Controls: |
independent switches for drive
and vacuum motors, aluminum
body, UL listed explosion proof
rated for use in hazardous
areas. |
|
Drive: |
constant torque rated for longer
component life @ 1,844 in. lb.,
58 rpm |
|
Vacuum: |
rotary vane vacuum pump, oil
less design, permanently
lubricated and sealed bearings,
self adjusting/self lubricating
graphite vanes for maximum
efficiency and long life with
minimal maintenance. 25 27
Hg. |
|
Vacuum pot lid: |
machined 6061 3/4" thick
aluminum plate with replaceable
1/2" thick gum rubber seal and
10 gage stainless steel seal
retaining plate. |
|
Base size and shipping weight:
|
24
wide, 54 length, 560 lbs. |
|
All
vacuum mixers are fully
assembled and factory tested
prior to shipping and shipped
enclosed in wood crating |
|
|
|
The largest capacity of
the Series II model
line. The V500 can
produce up to 500 lbs.
in a single batch. Able
to mix enough material
for 3 3 ft. x 12 ft.
sheets, the V500 can
often handle a solid
surface plants pouring
needs in just a few
batches a day. Personnel
freed up from pouring
and cleaning are able to
concentrate on other
tasks making for a more
productive and efficient
work place.
The large capacity
mixing pot; like all
Series II vacuum mixers,
features a companion
style drive for use with
the Pot Tamer transfer
lift, pouring dolly.
Also compatible with
several bucket grab,
pouring
attachments for use with
overhead gantry systems. |
|
Vacuum
mixer construction: |
all
welded metal base frame and
covers for durability, enamel
painted MarMax
green. |
|
Mixing pot: |
30
dia. x 21 deep, roll formed,
tig welded 10 gage, 304B grade
stainless steel with companion
style drive for use with Pot
Tamer transfer pouring dolly. |
|
Mixing blade: |
formed and tig welded 3/8 x 2
stainless steel flat bar with
replaceable nylon scrappers and
quick release attachment pin. |
|
Capacity: |
500
lbs., 125 qts., 31.3 gal, 120
liters |
|
Electrical: |
|
UL and CSA listed
explosion proof rate for
use in hazardous areas,
1 hp direct drive vacuum
pump motor, 3 hp gear
reducer drive motor.
|
|
230/460volt-60hz-three
phase,
220/380/440volt-50hz-three
phase |
|
|
Controls: |
independent switches for drive
and vacuum motors, aluminum
body, UL listed explosion proof
rated for use in hazardous
areas. |
|
Drive: |
constant torque rated for longer
component life @ 2,710 in. lb.,
58 rpm |
|
Vacuum: |
rotatary van vacuum pump, oil
less design, permanently
lubricated and sealed bearings,
self adjusting/self lubricating
graphite vanes for maximum
efficiency and long life with
minimal maintenance. 25 27
Hg. |
|
Vacuum pot lid: |
machined 6061 3/4" thick
aluminum plate with replaceable
1/2" thick gum rubber seal and
10 gage stainless steel seal
retaining plate. |
|
Base size and shipping weight:
|
24
wide, 54 length, 630 lbs. |
|
All
vacuum mixers are fully
assembled and factory tested
prior to shipping and shipped
enclosed in wood crating |
|
|
Another MarMax Systems innovation . . .
allows one person to remove pot from mixer
and transport materials to mold. Powered
lift positions pot above mold surface to
pour matrix directly onto mold surface. Worm
gear tilting mechanism allows easy control
of pot angle to regulate amount of matrix
being poured. Companion style drive yoke
assures correct alignment and secure
handling of pots in all positions.
|
Construction: |
all
metal formed and welded base,
covers, and push handle. Enamel
painted MarMax
green. |
|
Lifting system: |
2½
bore heavy duty hydraulic
cylinder, lifting capacities to
match
Series II vacuum mixer rated
loads.
|
|
Rotator system: |
worm
gear driven pouring control
maintains pot angle in any
position. Manual operation.
Companion style yoke securely
holds mixing pot for tilting, up
to 360 degree rotation possible. |
|
Electrical: |
self
contained 12 volt DC battery
power system, furnished with
automatic battery re-charger.
Up/down push button hand
control. |
|
Casters: |
front, two 8 dia. phenolic
tread rigid casters
back, two 8 dia. phenolic tread
swivel casters |
|
|
S3 VACUUM PROCESSOR 500 LB.
CAPACITY |
Bridging the gap between batch mixers and
automated pouring machines
Provides superior processing of solid
surface due to its unique design features.
 Mixing
pots sit in a versatile dolly that simply
rolls into position beneath the mixing head.
This feature eliminates the need for
specialized equipment to lift the mixing
pots onto and off the mixers base. The
portable dolly allows mixing pots to be
preloaded with resin and filler at dedicated
bulk storage stations before transport to
the vacuum processor.
A 3 diameter stainless steel body drain
valve positioned on the bottom of the mixing
pot allows matrix to be discharged directly
onto the mold surface with out having to
rotate or tilt the mixing pot. Adjustable
control enables quick filling of large sheet
stock molds or limiting drainage for
discharge into closed sink molds. |
|
THREE MODELS AVAILABLE: |
-
Model S3-C constant speed
-
Model S3-VS variable speed
-
Model S3-VS- TC variable
speed with timed control
|
|
|
Electrical Service: |
|
UL and CSA listed for
use in hazardous areas |
|
Mixing blade drive motor
5 hp |
*230volt-60hz-3 phase @
12.6 amps |
|
Vacuum pump drive motor
1 hp |
*230volt-60hz-3 phase @
4.4 amps |
|
* Mixers can be supplied
with motors for any
standard international
voltage and frequency |
|
|
Compressed Air Service: |
5
cfm @ 80 psi (for raising mast) |
|
Controls: |
|
Model
S3-C:
On/off
switch for
mixing blade
drive |
|
Model
S3-VS:
Programmable
variable
speed
reversing
controller
for mixing
blade drive |
|
Model
S3-VS-TC:
Programmable
variable
speed
reversing
controller
for mixing
blade drive
Adjustable
on/off cycle
timer and
cycle
indicator
lights |
|
All models:
On/off
switch for
vacuum pump
Hand control
valve for
raising and
lowering
mast |
|
Model S3-VS-TC: |
|
|
Vacuum Pump: |
Model S3-VS-TC
Mounted directly on unitized
mixer frame Oil less rotary vane
fan cooled with permanently
lubricated and sealed bearings,
self adjusting/ self lubricating
graphite vanes for maximum
efficiency, 24 to 27 Hg.
Includes filters, muffler,
vacuum check valve, and vacuum
pressure gauge |
|
Mixing Blade Drive: |
|
Model S3-C:
Clockwise rotation,
constant speed, 34 rpm,
212 fpm contact speed
with side of processing
pot, 3,480 in. lbs.
output torque |
Models S3-VS and
S3-VS-TC: Reversible
rotation, variable
speed, 24-65 rpm,
175-474 fpm contact
speed with side of
processing pot, 3,480
in. lbs. output
torque |
|
|
Mixing Blade: |
 1/4"
x 1 1/2" formed and tig welded
stainless steel flat bar with
polyethylene wipers contoured to
the shape of mixing pot |
|
Mixing Pot: |
 28
dia. x 26 deep, roll formed tig
welded 304B, 10 gage stainless
steel with 3 dia stainless
steel dump valve on bottom of
pot |
|
Capacity: |
500
lbs., 125qts., 31.3 gal, 120
liters. |
|
Mixing Pot Dolly: |
4
10 dia. heavy duty pneumatic
swivel casters, automatic mixing
pot centering design |
|
Mixing Pot Lifting Sling: |
Double leg chain lifting yoke
with spreader bar |
|
Mixing Pot Lid: |
Machined 6061 3/4" thick
aluminum plate with replaceable
1/2" thick gum rubber seal,
viton shaft seal and 10 gage
stainless steel bolt in place
retainer plate |
|
 |
|
|
Base Size: |
36
wide, 66 long, overall height
open 74, overall height closed
43 |
|
Shipping Crate Weight and
Dimensions: |
|
Complete processor with
pot, dolly, and lifting
sling: 68 lg. x 40
wide x 62 high, 960
lbs. |
|
Extra mixing pot and
dolly only: 40 lg. x
40 wide x 44 high, 315
lbs. |
|
|
All
S3 vacuum processors are fully
assembled and factory tested
prior to shipping and shipped
enclosed in wood crating |
|
|
|
