|
|
|
|
|
Pre-engineered crane packages or custom
sizes for cast polymer applications
|
Gantries are designed for use in
pouring areas, demolding and
finishing areas, or anywhere an
overhead lifting system can
provide a safer, more productive
solution to handling heavy
materials. Standard self
supporting spans 20 ft. to 80
ft. lg. Open beam trusses
with top running trucks reduce
chances of contamination from
dust and debris falling into
molds. Easy all bolted
installation, as well as,
disassembly make this a great
choice for growing manufacturers
who may want to re-locate the
gantry system in the future. A range of hoist
attachments are available for
mixing pot handling, demolding,
and vacuum lifting.
|
Construction: |
3 x
3 structural steel support
posts with ½ base plates with
pre-punched anchor holes. 4
I-beam welded truss style crane
rails and top running bridge
rail. 10 channel end beams.
Enamel painted Marmax
green and safety yellow. |
|
Capacity: |
1,000 lb. capacity, 2:1 safety
factor. |
|
Crane Anatomy: |
|
Self supporting design
with open beam truss
construction eliminates
the need for external
bracing and prevents
binding while allowing
smooth travel the entire
length. |
|
Top running bridge rail
truss. Heavy duty end
trucks with
pre-lubricated and
sealed 3 flanged guide
wheels and 1Ό torsion
rollers. |
|
Rolling hoist trucks
with sealed and
permanently lubricated
3 flanged guide. Wrap
around side plates
provide extra safety
margin in case of axle
failure. |
|
Pivoting cable reel
mount plate. |
|
|
Construction: |
Hoist: 1,000 lb. capacity, 120
volt 60 hz 1 phase
electromagnetic brake motor,
stops and holds loads even under
power failure. Furnished with
hand held up/down pendant
control switch and chain take up
container.
|
|
Cable Reel: |
Automatic cable take up. 120
volt, 15 amp capacity with twist
lock plugs. |
|
Sizes: |
Standard footprint, 18 ft. x 20
ft.
Standard footprint, 20 ft. x 40
ft.
Custom sizes and configuration
available. Please contact for
quotation.
|
|
|
BRIDGE
CRANE HOIST ATTACHMENTS
 |
Manually controlled
rotating mixing pot bucket
grabs:
|
clamps to pot and
rotates pot for
pouring directly
onto mold surface |
|
available in sizes
to fit most standard
mixing pot sizes |
|
tig welded stainless
steel control wheel,
welded steel support
frame, enamel
painted Marmax
green, oil
impregnated bronze
bushings at pivot
points |
|
locking tension
clamps secures pot
in pouring harness |
|
 |
Gear driven rotating
mixing pot bucket grab:
|
worm gear driven
rotating harness
allows easy
positioning of
mixing pot over mold
and holds at tilted
angle for pouring |
|
available in sizes
to fit most standard
mixing pot sizes |
|
steel support frame
enamel painted
Marmax green, oil
impregnated bronze
bushings at all
pivot points |
|
locking tension
clamp secures pot in
pouring harness |
|
 |
Non-rotating mixing pot
sling grab:
|
lifting studs
penetrate holes
drilled in angle
ring to allowing
mixing pot from to
be lifted from mixer
and moved to mold |
|
available in sizes
to fit most standard
mixing pots |
|
welded steel support
frame enamel painted
Marmax
green |
|
 |
2
cup sink demolder:
|
uncomplicated and
easy to use - air
driven vacuum
ejector pump
attaches to in plant
compressed air
supply |
|
built in pressure
reservoir maintains
vacuum even with air
line disconnected |
|
2 6 dia.
adjustable, pivoting
vacuum cups attach
to sink bowl and
detach in seconds,
lifting capacity 140
lbs |
|
27 hg (vacuum
pressure) @ 50 to 80
psi, 1.6 cfm, 4:1
safe work load
rating |
|
welded and pressure
tested, enamel
painted Marmax
green |
|
overall length 19½ |
|
 |
2 cup tub demolder:
|
ideal for demolding
and handling tubs,
shower pans or any
other heavy objects |
|
2 10 dia.
adjustable, pivoting
vacuum cups or 2
optional extra heavy
duty |
|
12 ½ x 16 ½ oval
cups, shown with
optional safety
straps, 4:1 safety
rating |
|
operates on 50 to 80
psi in plant air
supply, pressure
tested built in
reservoir |
|
lifting capacity,
350 lb. and 500 lb.
|
|
overall length 50 |
|
 |
3 and 4 cup panel demolders:
|
reduce risk of
damage or injuries
caused by handling
heavy, fragile
panels |
|
available in 3 or 4
cup models with 10
dia. vacuum cups on
movable arms which
easily adjust to the
length and width of
panel up to 6 ft x
12 ft |
|
air driven vacuum
ejector pump
operates on 50 to 80
psi compressed air,
1.6 cfm air usage |
|
welded steel
construction,
pressure tested at
assembly, enamel
painted Marmax
green |
|
lifting capacity 350
lbs. |
|
overall dimensions,
7-6 long, 30 wide
|
|
|
|
|
|
|
