| Allows
manufacturers to take advantage of vertical
storage space provided by multi-level mold
storage conveyor racks. Self contained
12 volt D.C. battery system with charger
eliminates restrictions caused by power
cords laying on the shop floor or hanging
from the building ceiling.
TRAVERSING SCISSORS LIFT
Heavy duty
materials, welded construction, and oil
impregnated bushing assure years of trouble
free low maintenance service. V-guide caster
wheels with greased, replaceable needle
bearings permit easy movement of lift on
V-guide floor rails.
TRAVERSING SCISSORS LIFT
|
Construction: |
|
Mig welded 3” x 5” x 3/8” steel
bottom frame and cross members
with welded carriages and push
handle mount plates. Heavy duty
bolt on push handle |
|
Plasma torch cut 3/4” x 4 ½”
tapered arms Triple pass welded
steel hydraulic cylinder mounts
with oil-impregnated bronze
bushings at pivot points |
|
Mig welded 3” x 4” x 1/4” steel
top frame and cross members with
pre-punched, adjustable conveyor
track section mount holes |
|
|
Carriage Assembly: |
Machined steel 6” dia. V-guide
wheels with zerk style grease
fittings and replaceable needle
bearings |
|
Service: |
|
15” to 100” service height, 52”
wide base, 10’-0” long |
|
15” to 120” service height, 52”
wide base, 11’-0” long |
|
Both
models available with standard
conveyor track sections
120”,134”, or 144” long.
Non-standard lengths available
upon
request |
|
|
Power System: |
|
12 volt D.C. self contained
battery system. Furnished with
automatic re-charger, 115 volt,
60 hz, 10 amp single phase
electrical requirement |
|
Up/down remote pendant control
controls lift, hold and lower
positions |
|
Double acting hydraulic power
unit, 1.6 G.P.M. flow, 10 quart
capacity reservoir tank |
|
2 1/2 “ bore, 24” stroke, 3,000
P.S.I. rated hydraulic cylinder |
|
|
Capacity: |
1,000 lbs under load |
|
