|
VENTILATION SYSTEMS
Primarily used in mixing area and pouring
areas, but can be used anywhere assistance
is needed in the control of fumes and
contaminates. Screened intake vents pull air
across the floor. Dust and odors are
exhausted outside. High velocity ventilation
system design pushes air upwards away from
building for better atmospheric disbursement
of exhausted air.
Not for use with combustible or toxic
vapors.
|
Construction: |
Formed 18 gage galvanized steel
intake manifolds with wire mesh
vent openings. 24 gage spiral
formed galvanized steel exhaust
stack with galvanized steel roof
flange and rain skirt. Rolled
formed and assembled 20 gage
galvanized steel venturi style
weather cap with automatic, air
flow activated aluminum rain
dampers. |
|
Fan and Motor: |
24”
dia. tubeaxial fan with
balanced, non-sparking aluminum
blade. 1½ hp fan cooled motor
rated for hazardous location
use. 230/460 volt-60hz-3 phase.
Available electrical options
include single phase and 50 hz
compatible motors.
|
|
Exhaust Stack: |
24”
dia. spiral formed galvanized
steel duct, 15 ft. lg. duct
section with companion ring for
fan. Galvanized steel rook
flange and rain skirt,
adjustable for roof pitch
with galvanized steel weather
cap with automatic dampers. |
|
Air Flow Rating: |
5,626 cfm @ ¾”
static pressure |
|
 |
|
